Multitask effortlessly on your PC or Mac as you try out X AIR, a Music & Audio app by Empower Tribe Innovations DE GmbH on BlueStacks.
About the App
X AIR is a Music & Audio control surface from Empower Tribe Innovations DE GmbH that puts your BEHRINGER X AIR mixer right on your Android phone or tablet. Mix the room, shape tones, and tweak effects without being tied to the console. Walk the venue, stand by the wedges, and make changes in real time where it actually matters.
Prefer a larger screen? Some folks also run X AIR on BlueStacks for extra space during soundcheck.
App Features
- Live mixer control: Adjust up to 18 inputs and route them to 12 buses with smooth, responsive faders.
- Simple or expert view: Switch between a streamlined layout or deep editing when you need surgical control.
- Full channel strip: Set preamp gain, low cut, polarity, phantom power, and stereo linking right from your device.
- Parametric EQ + RTA: Fine‑tune EQ with an optional analyzer overlay or pop out a big dedicated analyzer screen.
- Clear metering: Keep an eye on every level at a glance, whether you’re on a phone at the stage or a tablet at FOH.
- Bus sends from the channel: Send to monitors or FX straight from each channel fader for quick mixes.
- Deep processing pages: Dial in preamp settings, gate, compression, EQ, and bus sends with detailed controls.
- Effects rack, X32-powered: Edit four internal stereo FX—think hall and vintage room reverbs, modulation delay, dimensional chorus—and explore 50+ studio‑grade options.
- Personal monitor mode: Lock into a single bus so performers can adjust their own mix without touching the mains.
- AutoMix groups: Two gain-sharing groups keep panel talks or conferences tidy and consistent.
- Groups on tap: Control 4 Mute Groups and 4 DCAs directly from the app.
- Snapshots ready: Browse, filter, and recall any of the mixer’s 64 internal snapshots in a flash.
- USB returns (X18/XR18): Route USB audio back to Aux or FX returns when needed.
- Quick setup: Mixers have a built‑in access point—pick the network, connect, and the app finds your mixer. You can even lock your device to a specific mixer.
- Demo mode: No hardware nearby? Explore the interface and features without connecting.
- Performance note: Uses mixer‑internal DCAs (instead of legacy IDCA) for lower network load and snappier response with multiple devices.
- Requirements: Android 4.0 or higher (5″+ screens recommended). For X AIR 1.5, use mixer firmware V1.11 or later, or run in demo mode.
Big screen. Bigger performance. Use BlueStacks on your PC or Mac to run your favorite apps.
